2+1 FCS recommendations needed

General Discussion
1

Hoping some of the more seasoned guys with FCS fins can save me  some money. I am looking for recommendations on which 2+1 set up to go with for first LB. Surfed shortboards all my life and am picking up a 9'6" Doyle tomorrow that is 22 something by 3 (decided against a HP Brewer I was looking at) the board will see anything from ankle to maybe head, and usually knee to waist high beachbreak. It will really be a feeler type board for me but I'm thinking I am going to want to try and turn it more than nose ride it. Pretty sure I won't do much of either but the key word is "try", so should I go with the cutaway and GLs? Dolphin and GXs? what size for center fin too?

Thanks

2

put a big single fin in it and figure out how it works first.  sidebites on a 9’6", whatever suits your style? 

3

http://www.surffcs.com/ja/sup/fins/surf/quads2/G-XQRear.aspx

with 

http://store.finsunlimited.com/75dd.html

 

it will roll rail to rail like a dream !  put the center so the leading edge is anywhere from lined up with the trailing edge of the side fins to an inch back of the trailing edge of the side fins .

if you want more drive you can get the flat sided GX but the GXQ turn much better .

4

I use a 7" inch middle fin and the smallest side fins;

 

or as a single fin a 8 or 8 1/2 single fin notice that I don´t make long noses...

 

If the wave get bigger I use a single fin of 8" inch and maintain the smal sided fins