4'9" planing hull

General Discussion
1

Hi I’m going to shape a board with this outline and I was wondering if a single to double concave would work and how depth the concave should be ? Do you have any advice for the thickness at the tip of the tail and at the tip of the nose ? The board is going to be 1 14/15" thick and I want that it to be 18.5 liters

Thank you !

1936×2592 1.27 MB

2

and thats not really what I would call a planing hull, but if it were mine I’d make the concaves about 1/8" to 3/16", keep the tail just thick enough for your fin plugs, and thin the nose to about 5/8" at the tip.