Hi, just a bit late (finished the shape on December 2005) but here’s my number 3, Eps-Epoxy board, i’m really happy with it even if i used it just once.
Cann’t wait for winter waves!
Regards from Italy Flavio
Flavian-san,
It might be the way I SEE the picture,but…that’s a tiny box for all that board…what kind is it?
It’s a home made box, the fin slot is 15cm long, since where i live it’s impossible to find spares i’ve to do all by myself, even leash cups using my ooold lathe and mill. (for board #4 i’ll use a leash loop)
What fin dimension you suggest me? i’ve no experience at all and a fin takes just a little time to be done with plywood and resin.
Regards Flavio
A lot has to do with the shape(of the fin and the board)…but a fin somewhere in the 5.0 inch base about 8 or 9 inches tall , in a raked shape …checkout some of the boards on the photo page under resources.That should give you an idea of what type of fin.
9 Inches, it’s much bigger than the one i’ve done, now i know what to do during the next sleepless night!
Thank you very very much.
Regards Flavio
Whoa!
Hi Flavio, it’s been a long time out of Swaylocks!
glad to see #3 board, looks very nice to me.
Post more pics!
It’s September and swells are about to start…
Give a call if you pass by.
yo
tavlas