Hey guys… i wanted to share a fun project i just finished. The job consisted of a few small surfboards… and two 16ft x 44" wide “paddleboard” signs which here done by the guy i work for. My part was the three 7’ x 24" skateboards.
I used a 3/4" sign ply for the decks, pu foam for the wheels, and a typical pine 2x8 to cut and shape the trucks. I finished it off with paint, full digital print on the bottom, and grip tape on the deck. It was my first project quite like this and i had a blast doing it.
I’ll tell the rest with pics…
Here’s a pic of the raw deck cut routed and drilled with shaped trucks and wheels.
…a pic of the setup i used to turn the wheels
Assembly line…
Finished bottoms & deck…
For a little perspective…
Finally… me all stoked at the finished product.
NEXT PROJECT!!!
