A little help from someone with a Frye Eagle?

General Discussion
1

Any chance someone with an eagle would talk me through the rail shape (or if you wanted to be real nice a pic or two would be fantastic)

 

Iv got my blank glued up

 

 

And I have a template taken off another 11’6’’ but Id be really
curious to see how the rail shape would differ to a Frye original.

What
I was thinking of was a slight up rail in the nose blending into a
slight downrail through the mid and onto a more pronounced down rail in
the tail and a rolled front to a relatively flat and a slight V through
the tail

2

Here ya go.  My rail contour gauge with rail impression directly off the Frye on which it's sitting.  That would be at the mid point.  The rear third = vee with down rail, middle third = bellied with about 60/40 down rail (see link) and front third also bellied with about 50/50 rail.

 

http://www.swaylocks.com/resources/detail_page.cgi?ID=392

3

Thanks John, much appreciated. It sounds pretty close to the one I was looking at