Oxymoron?
Planning to glass 4 and needed somewhere to put 'em while they kick. 1 1/2" PVC fits perfectly with Olympic plates.
Looks killer! I may have to build one.
Ps. Let me know if you need a hand, or moral support haha.
Oxy but not moronic
Clever.
All the nest
Sweeet! diggin it
do you have super slow kick resin?
WideAwake you are always welcome. I’m sure you could teach me a thing or two about glassing. Shooting to glass this Saturday. It should take about ten or twelve hours to get them all glassed and hot coated.
Keith, I am using epoxy. I have done 3 boards at once before. Usually when I finish Step 1 on board 3 it is time for Step 2 on board 1 etc, etc… all the set up and prep work that it takes to glass one makes it worth my while to do three or four at once.
Three point racks keep boards from twisting.
Two will sit crooked on the racks while kicking.
Be careful.
Nice otherwise.
Thanks for the heads up Barry.
I remember you saying this before…
I will be very careful and when I eventually get a shop built, it will be 3 point racks for sure.
Ohh man I was hoping you would teach me something hahah.
Great design! Simple.