and wanted your guys opinions on where and how you’d situate two fins on this board.
It is 5’10"x20.5"x2.75"
tail width 17.25
rockers 3.25 nose, 1.5 tail
bottom contours are flat to vee the last third out the tail.
10.5" from tip to tip
4.125" butt crack
pretty much based this on the fishcuit, but wanted a twin instead of a quad.
i plan on using the rasta fins which i’ve got on another board all ready.
from looking at the archives, it seems like i should have the trailing edge about 7 inches from the tips and 1.25" from the rails? this would put the trailing edge almost 3 inches forward of the but crack though…
thoughts? comments?
sorry for being so redundant, i see notes about this all over the place, but just thought i’d ask anyway.
aloha-