Board number 5 in eps/epoxy

Well, here we go - this is in the resources too, so i won’t add the same pictures.

It is 6’0"x15 3/4nx21wpx15 3/4tx2 3/4" thick. 2#eps with luan stringer.

2x4oz bottom with red/blue opaque splash

3x4oz deck with opaque white inlay.



bottom has a single concave, into a short double between/through fins out the tail.

fins are all g5, as the customer is a solid guy, with double foiled trailers.

60/40 rails with a very tucked edge, and hard edge in tail

thanks for looking, and welcome any comments.

Damn nice Rob.

Hope she goes.

(Im building my first four finner and cant wait to put her in the water)

nice work, i hope it works as good as it looks. Have you give it a whirl - Any swell forcast for the east coast??

hey thanks. means loads.

i haven’t given it a go yet, but will definately let you know.

i have the same template as a personal board, in twinzer gear, and it’s my favourite at the moment, so fingers are crossed…