Cant figures for twin and thrusters and Bonzers.

General Discussion
1

You know when someone says something and you go ... What the..?

Recently someone told me the standard cant for twins in the 6 foot range was 10 degrees

 and for thrusters was 4 degrees ?

 I thought it was  6 deg for thrusters and its been soo long since I did a twin.

Can anyone just give me general figures for the cant on

 Twins

 Thruster

 and Bonzers please?

 But wait....Theres a prize...

 

 I'll throw in 5 new white plastic leash plugs as well as postage.

Thanks guys.

2

As far as I know for thrusters 4 degrees was the standard but many are now at 6 I think the FCS H2 are 10 degrees.

Bonzers are usually 22 but sometimes 18 up

Quads are often 4 front and 8 rear, but anything goes. sometimes 4 front and 0 rear

Keels are often 0 and 4

Twinzer 13-14 front and 3 to 4 rear

 

Sorry don’t know about twins too much as far as I recall FCS TF1 are 4 degrees

 

No doubt there are a zillion variations, but they are my measurements from boards Ive owned. (Campbell, Mabile etc)

3

Here’s my call on cant.

Bonzer runners 22.5 degrees

Quads 7 & 2 degrees.

Thrusters 5 degrees.

Twins 2 degrees.

Aloha, Rich

4

…hello,

tilt on fins is based on overall design.

For what is intended.

Bear that in mind first.

STD are like Halcyon say except that bonzers are most at 18º and some at 22º

and some MR twins had the number you got.

5

Thanks guys, send me your addresses and I'll mail the plugs to you.

 Brett. surffoilsmail@gmail.com