cut lap

Hey I sanded my cut laps on a red tinted board. Problem is, now there is a pinkish area around where the lap meets the bottom lam. what should I do, and how did this happen?the pink area is only on the flats, not the dark rails

never mind guys. i Figured it out. Thanks a buch for your help though

Did you prime the lap prior to sanding?  I've had this happen if I don't tint the resin used on the lap prime.

Oh yeah, add to my previous post "and if I'm doing a tinted deck".  Obviously, don't tint the lap prime if you're doing a clear deck.

entire board is red with dark rails

was it pink looking because it was sanded ? and once you got it wet it darkened up?


Si or No?