Hey Sways,
Looking for words from the wize.......
Just repaired a broken LB. I used epoxy - Heated post cure was at 120F for about 12 hrs and then sanded the next day. It sanded nicely.
From my searches on post curing epoxy - am I correct in assuming that after a heated post cure the epoxy should be almost fully cured and board ready to be surfed?
In the past I waited at least 7 days without heated post curing and experienced no issues. Although those repairs were deck delams not a full break.
Should I wait longer or just let er rip....??
Thanks ahead of time for your help,
yoyo