Hello,
Please, if you find it nice to do, help me define specifics for a mixture of
- The 2+1 Longboard [as laid down by Dave Parmenter in the guide he wrote and placed on this website],
and
- The outline and length of the Quiksilver Jeff Hakman board.
Most help is needed with rocker and rails.
To be surfed at at ANGLET:
http://www.francevuesurmer.com/grand.php?id_photo=10209
Gives:
AND GUETHARY/ALCYONS:
http://www.francevuesurmer.com/grand.php?id_photo=10325
Which gives waves at Guethary:
http://www.wannasurf.com/spot/Europe/France/Basque_Country/Guethary/photo/photo40155784232c1.jpg
Which CAN can give waves at Alcyons:
AND
http://www.wannasurf.com/spot/Europe/France/Basque_Country/avalanche/photo/photo3f13088346b70.jpg
Jsut to give an idea for travelling as well…
SO…
2+1 Board for a good surfer 10+years
Performance envelope: 1.20m-2.40m = 4.0 – 8.0 feet average to good waves.
Surfed: aggressively, more on back of board than on front…
Length: 8.0
Width: 20.25”
Max Width @ Centre
Thickness: 2.60”
Tail: Rounded Pin
Nose: Pulled in Nose
W 1 Ft off Nose: 12.80”
W 2 Ft off Nose: 18.00”
W 1 Ft off Tail: 13.85”
W 2 Ft off Tail: 16.80”
Overall rocker: manoeuvrability
Nose: 4.75”
1 Ft from Nose: ??
2 Ft from Nose: ??
1 Ft fr Cntr 2 Nose: ??
Tail: 3.25”
1 Ft from Tail: ??
1 Ft from Tail: ??
RAILS:
Rails are soft all over gradually going harder toward tail, getting real hard after the single fin… id est 7.0” up from tail is hard. Radius throughout. Fuller, boxier rails, flatter deck.
More hold, more drive, more manoeuvrability, less speed?
How thick? What radius?
Front section:
Nose to 1 foot down: ?
From 1 foot fr Nose down to 2 foot: ?
Middle section: ?
BaCK section
From tail up 1 foot: ?
From 1 foot off tail up to 2 feet off tail: ?
How thick? How round? How low/high? How much diameter ? 7
Fins: 2+1
SINGLE: MAISH polyester fin, non-cut-a-way, in a large fin-box…
Set at: 7.0” UP from tail
Base: 5.90”
Depth: 7.87”
SIDE FINS are two FCS G-L fins by Gorilla Grip:
Set at ? 14.25” UP from tail ?? originally 14.50
Base: 3.35” !
Depth: 3.54” !
Set at 1.25” off rail
Toe-In: 0.175” !
Fin-plug set at ???
Construction:
EPS and Epoxy, Stringerless, 8oz bottom and 8oz top…. Heated up to 60’celius=9/5*60+32= 140 Fahrenheit for 9 hours…
Decoration unknown as of yet…
Thanks a lot :=) !!!