FCS TC Aqualine fins

General Discussion
1

Has anybody tried these fins?

FCS specs say there is 6 degrees of cant in the front fins. Does anyone know if that has been built in off the tabs?

I have set my plugs for 6 degrees of cant, so using these fins could result in a total of 12 degrees. I think that would be too much, perhaps slowing the board down.

Any thoughts?

Karl

2

they caught my eye

really stiff with small tips and lots of cant

wicked

3

This discussion seems to be saying a huge amount of cant would create alot of lift while the rail in a turn, so better for softer waves. but 12 degrees still seems alot

http://www.swaylocks.com/forum/gforum.cgi?do=post_view_flat;post=146555;page=2;sb=post_latest_reply;so=ASC;mh=25;

4

i was thinking to use them griffin style quin but with a small trailer

should work great in juice

5

Got a new set off Ebay Paul. Just over half the NZ price landed here within a week.

The fronts are pre-canted 6* so you’d need to think about what cant you’d set into the plugs. I’ll have about 12* which will be interesting.

The back quad fins are smaller than the rear tri fin so you’d need to find a smaller middle back fin. The quad trailer is set back on the tabs much more too.