Fins / Rails

Archive 1999-2004
1

Just looking for a good way to make full even rails. fin placement is off also is there a good angle for fins as a rule of thumb, toe in as well?

2

Rule of thumb on fin angle is 4 degrees canted out from center of board. Toe-in rule of thumb: tape a piece of string to the nose and pull it back to the fin postion. That’s the angle. Variations are infinite. Doug

3

Rule of thumb on fin angle is 4 degrees canted out from center of board. Toe-in rule of thumb: tape a piece of string to the nose and pull it back to the fin postion. That’s the angle. Variations are infinite. Doug

4

Thank you for the help Doug. It is much appreciated.

5

Thank you for the help Doug. It is much appreciated.