Not perfect but good enough. Bought this old Eaton thrashed. Blended patina airbrushing and redid old spray from TC with Florescent orange to match lam.
Just need to gloss coat and sand. Any tips on not burning through paint?
Not perfect but good enough. Bought this old Eaton thrashed. Blended patina airbrushing and redid old spray from TC with Florescent orange to match lam.
1 Like
Finsh coat a little extra wax in styrene so no seperation over paint…240 to 400 grit depending how flat you want it…400 wet and dry is suprising abrasive wet .go thru the grades 600 800 1200…polish if you like…me up 400 grit then random orbit scotch bright maroon. hate polished boards
Like said; a cap or two full of extra Styrene Wax. Hand sand through the grits and buff with #2 polish.