Glassing Hips

Are relief cuts necessary for glassing hips? One or two? Have never glassed a board with hips in my life…

No.  Not enough curve to worry about.  6&4 E or Warp, even Volan, no problema.  Just work from the middle toward nose and tail at each end when you tuck your rail.  Should be no issues for your better than average skills.  Good to see you’re still at it.  Missed that avatar.  Lowel

Muchas gracias :).

You may wind up with a little more cloth than usual at the tail because you are pushing it around the curve at the tip.  So you may need to make an extra relief cut or two at the tail to get a good wrap.  Cut off the excess where one side overlaps to the other.