Simply put, I glasses a 6 oz bottom. And a 6 oz/4oz deck. But on the deck I put the 4oz down first and then the 6oz ontop without thinking. Is this bad? Or does it make no difference? Also the 4oz on the bottom went about half way down the rails in case that changes anything.
Your fine. What you did sounds normal to me. 4&6 deck. 4 goes down first and is cut at mid rail. 6 goes down on top of it and is lapped onto the bottom. Both layers laminate with resin at once. Lap is about 1 1/2” onto the opposite side.
Really appreicate the response. New to glassing and just wanted to make sure!