I’m glassing a 9’0’’ longboard here in Houston, Texas. I used two layers of 6 oz cloth on the bottom and one layer of 6 oz cloth on the top cause of lack of resin. Anyway, ther are a ton of bubbles on the bottom. My freind helped me with the top so it looks pretty nice. there are bubbles everywher. What the hell do i do. Also, the bubbles that were on the top from the bottom laps, i just put a slit in them and covered them with the glass job for the top of the board. bottom looks like crap. what do i do?
If the bubbles are small say 1/8 dia or less, just hot coat it and sand it down paint the hot coat with an good acrylic paint and put two coats of gloss on top and sand and polish it out. If they are bigger then that you might want to try and cut them out and glass over the top of the then hot coat acrylic paint and two coats of gloss and sand and polish. Good luck.
For the larger ones try a dremel tool to make a hole and then fill with resin.