have just moved and the only place to shape and glass is a large garage on the side of the house only problem with it is the smell is coming through into the house any suggestions?
thanks
paul
have just moved and the only place to shape and glass is a large garage on the side of the house only problem with it is the smell is coming through into the house any suggestions?
thanks
paul
try UV-catalyzed resin. It’s a lot less smell to start with.
you might find last week’s ‘Chemical Scrubber’ thread to be of use, especially Anton’s and Dale’s replies. If the vast majority of the air is scrubbed and the walls to the house are sealed ( use plastic such as the sheetrockers use plus duct tape ) then there shouldn’t be much in the way of fumes to get inside and they’ll find it harder to do so.
hope that’s of use
doc…
the walls are all completely sealed i think it is the door back into the house that is the problem as the smell is coming through over say 5 hours while the resin is drying fully
ok, then try using one of those fan-plus-a-box-of-aquarium-charcoal items mentioned in that other thread to scrub the air and get as much of the eau-de-resine’ out…you won’t get it all and you won’t avoid having some smell getting into the house, but that’ll cut it down as much as possible without sealing off a glassing area that is only accessed via the outside of the house/garage.
hope that’s of use
doc…
Hel paul - you live in UK? - E - mail me - I can supply tou with some UVC -