Been looking forward to getting product from Green Valley Mill but not getting any updates from them. Anyone know when they are going to produce a pricelist and get some product on the street? Thanks Scott
They will not even talk to you unless you have a resale license. I had to get a friend to get the information for me, and I’m still waiting to hear back from him.
Finally got a call from them today. They do not look real organized at this point but the lady that called was real nice.
Aloha all,
I have an account with GVM. Here’s what they offer:
Basswood, Red Cedar and Spruce stringers.
three finishes:
Unfinished = resawn lumber
Semi-finished = both sides sanded (cut your own rocker)
finished = finished stringer
Minimum order required! (set-up fee will be apply if minimums are not met):
8’ to 9’11" qty 10 per line item
10’ to 12’ qty 5 per line item
quantity discounts:
100-249 stringers: 5% discount
250+ stringers: 10% discount
six stringer widths:
1/8"
3/16"
1/4"
5/16"
3/8"
1/2"
eg: under 8’ basswood stringer 1/8" unfinished:$5.80, semi-finished:$6.20, finished:$6.80
hope this helps, PM me if any question
aloha
oops I forgot,
You have to setup an account with GVM and sign a contract. Rebecca is real cool and is learning board building.
And a “finished stringer” is just that…exactly what is listed in Clark foam catalogs. Not much room for mistakes during glue ups. I recommend unfinished and cut slightly wider on hull (bottom) and cutting deck exactly to rocker. Then sand or run a quick pass with a planer on bottom after glue up.
aloha