If you’ve been holding off on getting into epoxy, here’s your opportunity to learn everything there is to know about epoxy resin from one of the best. You’ll see Greg glass a board before your eyes with his Resin Research epoxy. You’ll also have the opportunity to see one of his perimeter stringer blanks. We’ll have a shaping booth set up, and he might give us a shaping demonstration, aswell.
someone bring a video camera and send me the tape
Can you be more specific about the time and place?
There is another thread with all the information at the top of all the messages with the title:
Cerritos College - Open House II
You can find all the info in there, but here is the basic info:
So. Cal. Surfboard Construction Forum 2
Cerritos College
Saturday, August 6th
9:00am - 3:00pm
Contact info:
RSVP Parking Passes required
(562) 860-2451 ext. 2927
For Directions, area and campus maps at mfgskills.com
11110 Alondra Blvd. Norwalk, CA 90650
I can’t believe this!!! I was in Huntington Beach the weekend before last, then I read that Bert’s going to be in Huntington and now Greg at Cerritos. I am totally bummed. You guys take plenty of photos and ask questions. Wish I could be there.
Poe Rava
Don’t blink while he is shaping. You’ll miss it.
40,000 boards and you start to get the hang of it.
He is a joy to watch.
GregTate…
Boy is that an understatment! While Greg isn’t as fast as he once was, he still makes quick work of the process. Greg will be shaping a 1lb. EPS foam blank, then sealing with spackel, and a lay-up of glass with his Resin Research epoxy system.
It’s great to watch a pro at work!!!
Thanks!
Ken
Time for the forum is getting closer. If you ever had any questions about shaping a surfboard or laminating with epoxy, here is your chance to watch a true pro at work. Greg is well respected and a self taught chemist. If that doesn’t say a lot about his passion for epoxy and surfboard design!
Come by and learn and meet Greg!