to herb or anyone with input, i need to mark the fin placement for a 6’5" swallowtail fish shape. i want to go twin fin and saw some of your boards in the “boards” section. how far up from the swallow points should i go?? thanks in advance. ed
8-1/2" thru 9" up from the tips to the trailing edge of the fin.Herb.
Herb: While on this topic. If you were to take a guess, what would the average S.Brom Fish type measure out at for swallow depth and rear trailing edge of the wide base fins. I’m into magic. Tom>>> 8-1/2" thru 9" up from the tips to the trailing edge of the > fin.Herb.
Herb:>>> While on this topic. If you were to take a guess, what would the average > S.Brom Fish type measure out at for swallow depth and rear trailing edge > of the wide base fins. I’m into magic.>>> Tom …It would depend on length,and width of board…but let’s say a swallow cut that’s 7" deep… the trailing edge wouldbe within a half inch of that.Herb.
Herb- Need S.Charge fins for a twinzer five fin Battail= 6’3" 11.25-19.25-15.00X 2 5/8 thick. Also a MR style fish 6’1" dimensions unknown- C5 single plug. Have fcs plugs only need fins and set up measurements please. Your kindly response and e-mail would be greatly appreciated. Happy Holidays-Peter
Herb- Need S.Charge fins for a twinzer five fin Battail= 6’3" > 11.25-19.25-15.00X 2 5/8 thick. Also a MR style fish 6’1" dimensions > unknown- C5 single plug. Have fcs plugs only need fins and set up > measurements please. Your kindly response and e-mail would be greatly > appreciated. Happy Holidays-Peter Sorry Peter, I don’t have your e-mail address,you can contact me thru the board page.Herb.