I like it Herb what’s the bottom configuration like. The thing looks like it’ll excellerate of the lip like crazy. Reminds me of my Platter. By the way what the procedure for posting photos like this one at Swaylocks? Nice work. Good Surfin’, Rich
Rich: Go to >>>Boards>>>either login or set up an account, Mike will e-mail you promptly with the login info. You go through the dialogue to populate the info on the submission form (adlib if it is something other than a board) and upload a photo that you already have on your hard drive somewhere. It goes into the que and depending on the number of submissions in front of you will show up in the next day or two. The system is setup to feature one new entry per day in Boards, Classifieds, Resources etc. Regards. Tom Sterne > I like it Herb what’s the bottom configuration like. The thing looks like > it’ll excellerate of the lip like crazy. Reminds me of my Platter.>>> By the way what the procedure for posting photos like this one at > Swaylocks?>>> Nice work.>>> Good Surfin’, Rich
board looks cool!! how do u get that sort of paint job?
Rich:>>> Go to >>>Boards>>>either login or set up an account, > Mike will e-mail you promptly with the login info. You go through the > dialogue to populate the info on the submission form (adlib if it is > something other than a board) and upload a photo that you already have on > your hard drive somewhere. It goes into the que and depending on the > number of submissions in front of you will show up in the next day or two. > The system is setup to feature one new entry per day in Boards, > Classifieds, Resources etc. Regards.>>> Tom Sterne Thanx Tom, I’ve though putting one of my boards up every so often might be good food for thought. Good Surfin’, Rich
board looks cool!! how do u get that sort of paint job? …The paint job is done with a cheapy Harbor Frieght airbrush,and liquitex paints.It’s a low tape use spray with only the stringer taped off.It’s really an easy paint job,with maximum results.3 colors used are;light green, med.blue,and white for the water reflection lines.Check the archives for my techniques, set-up and spraying.It’s alot different than the 101 JC airbrushing technique. …The bottom is basically flat with a slight,arched/cupped concave under the front foot to the leading edge of the fins.This is followed by a mild rolled vee between the fins and back into a flat bottom at the end of the board.He says it flies! It’s basically built for Newport waves,with river jetties in mine.Herb
…The paint job is done with a cheapy Harbor Frieght > airbrush,and liquitex paints.It’s a low tape use spray with only the > stringer taped off.It’s really an easy paint job,with maximum results.3 > colors used are;light green, med.blue,and white for the water reflection > lines.Check the archives for my techniques, set-up and spraying.It’s alot > different than the 101 JC airbrushing technique. …LOOK-UP(in the archives) "JC’S AIRBRUSHING 101…JUST REVIEWED IT!"AND/OR MY NAME UNDER THE SAME TITLE.Herb