Hi Guys, Thought you would like to see this John Belik Board glassed by Global Glassing in Oceanside for a good friend of mine Joe K. The next pics will show some NEW fin set-ups that will blow your mind. Mahalo,Larry
Hi Guys, Thought you would like to see this John Belik Board glassed by Global Glassing in Oceanside for a good friend of mine Joe K. The next pics will show some NEW fin set-ups that will blow your mind. Mahalo,Larry
Here’s the Belik Board in Twinzer mode, with a Dave Parimeter Keel in rear canted out at 4 degrees and Glen M. conard fin in front canted out at 18 degrees.
Here’s John Belik’s board in Quad mode using a Belik Quad fish Template made by Fibre Glas Fin.
Here’s the Belik in Quad mode Hawaiian style with the Wing Series By Hanalei Fins.
Here is the Belik with a Aqua Blue Keel set-up. Hope you enjoyed the pics with some new fin Templates. Mahalo,Larry
board and fins look great larry
Thanks silly, Looking forward to seeing your board pics. Mahalo,Larry
no doubt they wont be too pretty
just been redesigning and rebuilding the compsand “system”
making some huge breakthroughs wrt time savings
and ironing out some issues i have with the balsa rails
be starting a few boards in a few days
starting with a groms board im building as for cost for a local hottie
having trouble with the outline tho.
also he brought round his old board and i measured the rocker and its basically a fish rocker
is this normal
do groms boards generally have a flatter entry?
Have you seen Steve Lis quads over on kauai? Pretty sure he has custom double foiled fins?
Anyone know if the Wing Series quad setup is made for Future boxes as well? I’ve got a quad that would die to have these on it
Anyone know if the Wing Series quad setup is made for Future boxes as well? I’ve got a quad that would die to have these on it
Hi Meddle, I only make the Wing Series for ProBox. Thanks for your interest in the Wing Fins. Mahalo,Larry
Damn… my shaper is a die hard futures guy too… lol maybe next time around I can talk him into ProBox
Thanks for the quick reply!
-Ben
GUYS, I USED TO BE IN THE FACTORY AT H.I.C. SURFBOARDS, WHEN YOU THE PAYING CUSTOMER ORDERS A CUSTOM BOARD WE TREAT YOU LIKE YOUR BUYING A NEW CAR. GETTING WHAT YOU WANT ON YOUR NEW BOARD SHOULD BE THE SAME AS ADDING OPTIONS TO YOUR NEW CAR (RIDE). JUST TELL YOUR SHAPER THAT YOU WANT THIS OPTION, YOUR MONEY IS PAYING FOR IT. WHY NOT GET WHAT YOU WANT? ISN’T THAT THE REASON WE ORDER A CUSTOM BOARD TO OUR SPECS??? WHY NOT GET THE FIN SYSTEM THAT HAS THE MOST OPTIONS TO TRY? WHY SETTLE FOR LESS? REMEMBER IT’S MADE TO YOUR SPEC’S , THAT’S WHY YOU DIDN’T JUST GET ONE OFF THE RACKS. THINK CUSTOMER SERVICE…
Thanks Sako1 for your support Hawaiian Style. Mahalo,Larry
Meddle, Next time you get a new board let me know and I will be happy to take care of you and talk to your shaper. Mahalo,Larry
Thanks Larry!
BTW, the resin swirl work on that board is sick!
-Ben