hi in first sorry my english… After lamination work with pigmented resin when this is heavy I put my logo with a cloth patch… sometimes (but not always) the white surface of logo after few minutes it is dirty. thank you very much Giuseppe
The laminate material is contaminated. I have had similar problems that I traced to the powder that my cheap latex or rubber glove are packaged in when new. Be careful in handling the laminate with your hands and how they are stored. TS>>> hi in first sorry my english… After lamination work with pigmented > resin when this is heavy I put my logo with a cloth patch… sometimes > (but not always) the white surface of logo after few minutes it is dirty. > thank you very much Giuseppe
hi in first sorry my english… After lamination work with pigmented > resin when this is heavy I put my logo with a cloth patch… sometimes > (but not always) the white surface of logo after few minutes it is dirty. > thank you very much Giuseppe Buon giorno Giuseppe. Come stai? Lei sarebbe sorpreso come sporco le nostre mani sono realmente. Fare attenzione quando maneggiare il laminants. Che può guardare pulisce dapprima il luogo non guarderà cosí pulisce dopo che la resina è applicata. Ciao. Steve
Yea…What Steve just said!
I’m fine thanks…and you? My problem are’nt dirty hands on the blanks but the resin… example: red tint lam when I put my logo after 10 minutes the white logo surface is… dirty red or blue if lam is blue…like a drops (macchia in Italian) You understand? I use always plastic patch to move a blanks, never I touch with hands. I clear always with air. This problem is sometimes not always. Grazie molte>>> Buon giorno Giuseppe. Come stai? Lei sarebbe sorpreso come sporco le > nostre mani sono realmente. Fare attenzione quando maneggiare il > laminants. Che può guardare pulisce dapprima il luogo non guarderà cosí > pulisce dopo che la resina è applicata.>>> Ciao.>>> Steve
Your problem is with the paints used in the laminants. Use Nadar 6100 series paints. Luck.