ok, so i have a 9’ funboard with a fcs tri fin set up, ive never seen another board this long with this setup. However im a rookie, and im sure theres alot of shit i havent seen. Anyways, my question is, is this setup made for a smaller depth center fin? I cannot find a longer grommet style to fit it. Ive been lookin all over. Any help here? Peace-Stay stoked- Caleb
FCS used to make longboard fins that would fid the plugs, we would have to alighn like 6 plugs in a row and the fins would have 4 tabs instead of 2, however this failed alot so it is no more,the problem was since the tips were so high 8 inch 9 inch etc the leverage in the water caused theplugs to crack and the fin to roll. The fins well they are hard to find you have pretty much 2 options. 1. get a fin made and risk it failing 2. have the plugs removed and a center box installed, thats my best bet on the answer, btter play and WAY better support any ding king can doit for you. if you opt to get the fin made try RICH he posts under HALYCON http://www.surfboardglassing.com
Contact Surf Source for your longboard FCS fin, they should be able to sell you one. 904 247 0808.
surf source has the new ones with the fin box bottom, but im pretty sure they do not have the tab based ones, If they do let me know http://www.surfboardglassing.com
Hey Cabel, Drop me an email if you want me to do something for you. Mahalo, Rich
right on que rich http://www.surfboardglassing.com