(((longboard ??)))

i am building a retro/modern longboard-noserider, about 10’. where is a good point to have the widepoint? how far forward? where should the peak of the rocker sit?

i am building a retro/modern longboard-noserider, about 10’. where is a > good point to have the widepoint? how far forward? where should the peak > of the rocker sit? How do you want to ride it? Bottom turn? Nose ride? What kind of tail? Tail rails? Stern? What kind of surf? These design criteria are interdependent. You say you’re going to build it a certain way. What have you decided so far?

i want the board to perform like a modern longboard, but also to have good nose riding features. the guy is about 200lbs. i was thinking about 10’x19"x24"x 15.5"x3"??? possibly a rounded pin tail. keeping modern rails and lines

i want the board to perform like a modern longboard, but also to have good > nose riding features. the guy is about 200lbs. i was thinking about > 10’x19"x24"x 15.5"x3"??? possibly a rounded pin > tail. keeping modern rails and lines At 3" your 10’ board would be a little too thin. The deck would have a little too much spoon in order to follow your noserider rocker. But all your other ideas are great. These templates are 10’ x 15.5"t x 24" 19"n. The outline has a rounded pin stern. The wide point is offset 3.5" forward of center. Tail rocker is 3.7" (3.1% of board length) with moderate progression. nose rocker is 4.9", tending only to 22 degrees from center tangent. Lower midboard rail foam is a .9" quarter cylinder, and the deck foam crowns from 3.2" thickness to the rail line. This board should noseride well at trim speed. I would put a little tail V in it. It should turn relatively well and handle surf up to overhead. Length , Outline , Rocker 0 , 0.00 , 3.70 0.5 , 1.25 , 3.61 1 , 1.98 , 3.52 2 , 3.03 , 3.35 3 , 3.82 , 3.19 4 , 4.48 , 3.05 5 , 5.04 , 2.90 6 , 5.55 , 2.77 7 , 6.00 , 2.64 8 , 6.41 , 2.52 9 , 6.78 , 2.40 10 , 7.13 , 2.29 11 , 7.45 , 2.18 12 , 7.75 , 2.07 13 , 8.03 , 1.97 14 , 8.29 , 1.88 15 , 8.54 , 1.79 16 , 8.77 , 1.70 17 , 8.98 , 1.61 18 , 9.19 , 1.53 19 , 9.38 , 1.45 20 , 9.56 , 1.37 21 , 9.73 , 1.30 22 , 9.89 , 1.23 23 , 10.04 , 1.16 24 , 10.19 , 1.09 25 , 10.32 , 1.03 26 , 10.45 , 0.96 27 , 10.57 , 0.90 28 , 10.68 , 0.85 29 , 10.79 , 0.79 30 , 10.89 , 0.74 31 , 10.98 , 0.69 32 , 11.07 , 0.64 33 , 11.16 , 0.59 34 , 11.23 , 0.55 35 , 11.31 , 0.51 36 , 11.37 , 0.47 37 , 11.44 , 0.43 38 , 11.50 , 0.39 39 , 11.55 , 0.35 40 , 11.60 , 0.32 41 , 11.65 , 0.29 42 , 11.69 , 0.26 43 , 11.73 , 0.23 44 , 11.76 , 0.20 45 , 11.80 , 0.18 46 , 11.83 , 0.16 47 , 11.85 , 0.13 48 , 11.88 , 0.11 49 , 11.90 , 0.10 50 , 11.92 , 0.08 51 , 11.93 , 0.06 52 , 11.95 , 0.05 53 , 11.96 , 0.04 54 , 11.97 , 0.03 55 , 11.98 , 0.02 56 , 11.98 , 0.01 57 , 11.99 , 0.01 58 , 11.99 , 0.00 59 , 12.00 , 0.00 60 , 12.00 , 0.00 61 , 12.00 , 0.00 62 , 12.00 , 0.00 63 , 12.00 , 0.01 64 , 12.00 , 0.01 65 , 12.00 , 0.02 66 , 12.00 , 0.03 67 , 12.00 , 0.04 68 , 12.00 , 0.05 69 , 12.00 , 0.07 70 , 12.00 , 0.08 71 , 12.00 , 0.10 72 , 12.00 , 0.12 73 , 12.00 , 0.14 74 , 12.00 , 0.16 75 , 11.99 , 0.19 76 , 11.99 , 0.21 77 , 11.99 , 0.24 78 , 11.98 , 0.27 79 , 11.98 , 0.30 80 , 11.97 , 0.34 81 , 11.96 , 0.37 82 , 11.95 , 0.41 83 , 11.93 , 0.45 84 , 11.92 , 0.49 85 , 11.90 , 0.54 86 , 11.88 , 0.58 87 , 11.85 , 0.63 88 , 11.83 , 0.68 89 , 11.79 , 0.73 90 , 11.76 , 0.79 91 , 11.71 , 0.85 92 , 11.66 , 0.91 93 , 11.61 , 0.97 94 , 11.55 , 1.04 95 , 11.48 , 1.11 96 , 11.40 , 1.18 97 , 11.32 , 1.25 98 , 11.22 , 1.33 99 , 11.12 , 1.42 100 , 11.00 , 1.50 101 , 10.87 , 1.59 102 , 10.73 , 1.68 103 , 10.57 , 1.78 104 , 10.40 , 1.89 105 , 10.20 , 1.99 106 , 9.99 , 2.11 107 , 9.76 , 2.23 108 , 9.50 , 2.35 109 , 9.21 , 2.48 110 , 8.90 , 2.62 111 , 8.55 , 2.77 112 , 8.15 , 2.93 113 , 7.71 , 3.10 114 , 7.21 , 3.28 115 , 6.64 , 3.48 116 , 5.98 , 3.69 117 , 5.19 , 3.93 118 , 4.21 , 4.20 119 , 2.87 , 4.51 119.5 , 1.91 , 4.69 120 , 0.00 , 4.90 Rail: Width , Deck , Bottom 0 , 2.30 , -0.90 1 , 2.30 , -0.90 2 , 2.30 , -0.90 3 , 2.30 , -0.90 4 , 2.29 , -0.90 5 , 2.28 , -0.90 6 , 2.24 , -0.90 7 , 2.19 , -0.90 7.5 , 2.15 , -0.90 8.0 , 2.10 , -0.90 8.5 , 2.03 , -0.90 9.5 , 1.84 , -0.90 10.0 , 1.71 , -0.90 10.9 , 1.35 , -0.90 11 , 1.30 , -0.90 11.1 , 1.24 , -0.90 11.2 , 1.18 , -0.89 11.3 , 1.11 , -0.88 11.4 , 1.03 , -0.85 11.5 , 0.95 , -0.81 11.6 , 0.86 , -0.75 11.7 , 0.75 , -0.67 11.85 , 0.53 , -0.50 11.95 , 0.31 , -0.30 12.00 , 0.00 , -0.00