Anybody have any pics of the subject board or actually have one they could take pics of. I searched here, google and Cons’ site but no luck. You guys seem to be able to pull some pretty old school stuff out of the woodwork, so I thought I would ask. It was made around the early seventies. That was my very first board. 5’6" diamond tail with a stepped deck and 3 fins. The center fin was about 8" with 2 smaller side fins. The fins were held in the boxes with plastic spacer tabs that would allow you to slightly reposition the fins up or back in the boxes. I was just wanting to take a look at the stepped deck and see exactly how that was setup. Can’t remember it too well.