So I am going for a 5 fin setup as I have never tried quad and want to see if I enjoy it. I have tried the McKee fin setup read through it firmly but seriously have no clue.
A few questions
Are each measurement point supposed to be from the top, bottom or middle of the fin??
If you give more details about the board, rider, wave, type of fins…the forum might give you more specific advice.
McKee quad layouts have the rear fins closer to the stringer, other layouts have them closer to the rails.
The measurements given are for the rear position of the shaper’s dot. McKee uses a point near the front of the board to set toe-in, others use a simple distance at the shaper’s dots.