Micro Mesh Rub out on PE Gloss Coat

My first attempt rubbing out a PE finished board using Micro Mesh and a DA sander. No polish nor compound were used and the results were pretty good. I started using Micro Mesh on a ukulele build project. This one is on a three foot signature birthday board for my granddaugher. I started like any PE gloss coat.  Sanded to 400 grit and then wet sand using the nine 5” Micro Mesh discs with my DA sander.   Next I will try this on epoxy.

I would think a little # 2 spread on and allowed to dry, and then using the Micro-Mesh would really pop.  But for no polish that is indeed nice.