Hey All…
Received a 6’4" Spectrum from a buddy and resahped the sucker into a 5’11" MTF (inspired)–rocker fit perfectly. My template and measurement were taken off a 6’2" MTF but I widened it up the nose and tail a bit for my massive 170lbs. frame (jk). Anyway, just was wondering if anyone has a 5’11" MTF and could provide me with some fin placement measurements. The 6’2" rear fin seemed pretty far from the tail at 4 3/4" and the rear of the front fins were at about 10". I used the same wing and rail line from 6’2" so should I just go with that placement? I would appreciate any suggestions and recommendations? Thanks in advance!
Oh…I will post some pics later today…thanks!
I haven’t heard from anyone yet but may have a lead on Surfermag…we’ll see! Anyway…completely stoked on this board…hoping to use it this Friday in Jersey (praying and hopin’ the wind doesn’t switch…). Here are a few pics just in case anyone else wants to jump in on my excitement (tint is a bit rough b/c of the reshape–some deep gouges and foam additions–as well, I am not the greatest glasser)! Also, if you do have any info, or recommendations about placement I am still open to more info! Thanks again!
hey my buddy just chopped the tail off his busted mtf. I will see if I can find it around his garage and if it is intact enough. I will shoot you a pm tomorrow or something. Widening the tail definetly a smart move, i always thought the narrow ass on the board really inhibited in small waves.
Hey Rider…
Awesome! If you can find it just shoot it my way. I thank you in advance!