Need alternative for O'Fish'l fins

General Discussion
1

I have a board that used O’Fish’L fins.  Unfortunately, I’ve lost two of the fins and can’t find any replacements.  O’Fish’l seems to have gone out of business and none of the local surf shops carry the fins.

I’m considering a few options:

  1. take a set of Futures and try to grind down the base to match the O’Fish’l base

  2. Fill the existing fin box with epoxy and jam the futures fins into the fin box

  3. glass on a set of fins

  4. Replace the olf fin boxes (possible, but probably cost more than the board is worth)

 

Anyone else have any experiences like this?

 

Thanks.

 

Ray

 

2

wanted add maybe? or try some local shapers they might have some sitting in a box somwhere.
Which fins are you after and where abouts are you?

3

Try calling our Ventura location (805) 644-0009 

or try calling our Maui location (808) 871-7955 

We don’t carry the fins anymore but we might have some left over stock at either one of those two locations. Good luck.

4

Pro Tek fins had a good replacement line for O’Fishls… see if they still carry them.  Here’s a link to the web page:

http://www.surfcohawaii.com/category-s/64.htm

 

5

Call tammy or marino at fiberglass source gardena I just checked and they have 7 different tri fin sets. 

6

MAKE NOTE http://www.coconutpeets.com is now the worldwide distributor for OFISHL Fins.

There is a limited amount of stock, and OFISHL is not making more fins. ORDER while you still can.

Coconut Peet’s is located in San Diego, CA and ships domestic and international orders.

 

7

http://www.shop.coconutpeets.com/searchquick-submit.sc?keywords=Ofishl

8

Yeah that whole trip is really too bad.  

9

Just called Coconut Peet’s and they had the SS O’Fish’L replacement side fins that I needed.  Incredible customer service.  Was even able to order only one fin (as opposed to a set).  They seem to have a good supply.  Friendly staff and quick turnaround.  Wish we had a surf shop like this locally.

Highly recommend Coconut Peet’s for O’fish’L replacement fins.  Thanks to those who took the time to post here.