i know that you place a printed logo under the glass but is it possible to put it between the glass and the hot coat
i’ve never done it. i guess it’s possible, but one slip during sanding and you’ve got a damaged logo. i’d stick it under a layer of 4 oz. a little bigger than the logo, and then hot coat. maybe there’s even something lighter that 4oz… i dunno!>>> i know that you place a printed logo under the glass but is it possible to > put it between the glass and the hot coat
hi yes is possible but u need put a cloth patch on logos to prevent damage when you sanding… usually I use this method when I lam pigmented boards. before hot coat I sand little bit with a grinder to smooth surface. be carefull… when you use sander or grinder sorry my english peppe>>> i’ve never done it. i guess it’s possible, but one slip during sanding and > you’ve got a damaged logo. i’d stick it under a layer of 4 oz. a little > bigger than the logo, and then hot coat. maybe there’s even something > lighter that 4oz… i dunno! http://www.theglasser.com