Protecting a small paint job.

I’m going to do a paint job over some of the under-resin stuff on my new second-hand board. The area I’m painting is within a circle of about 40cm diametre on the top and bottom decks.

Wondering what my options were for protecting a small paint job. Do I need to clear coat the whole board? or can I get away with just clear-coating each area (hoping to avoid unnecessary weight).

And any recommendations for types of coat to use?

Cheers

Krylon clear.

Matte or gloss finish.

If paint is acrylic, you can use resin.

If paint is oil-based use Clear.

Good luck.