Question for Tom@daum.

Tom, I’m wondering if it would be possible to cut and glue two RED X boxes end to end for a little more fore/aft fin adjustment? Or, have you considered making a slightly longer box for center fins? Thank you, Scott

Tom, I’m wondering if it would be possible to cut and glue two RED X boxes > end to end for a little more fore/aft fin adjustment? Or, have you > considered making a slightly longer box for center fins? Thank you, Scott Scott, Yes to both. I have been told, people have cut our boxes in two and epoxied them together. And yes we are considering making a longer box. I can not tell you when we will get around to the longer box. Because, we are still focusing on short board applications such as bonzer side foils, and some more templates. We also have a number of medical molds we are working on. We just completed a cancer research component to reduce the amount of lab time to diagnose cancerous cells in blood samples by 85%. And are working out adjustments to a post opperative knee brace bezel. I wish we could spend all our time on Red X. But, we still do not have enough market share to cover dedicating all our time to making fin molds.

WOW, you are a busy guy! Thanks for the quik answer and dont work to hard, Scott