I'm using Research Resin #2000CE & Hardener #2100F.
What are the estimted cure times for this product? How long until I can sand it? I checked the product website and these product numbers are not listed. Anyone have any experience.
Its been about an hour and its tacky but not dry.
thanks
kensurf
September 25, 2010, 9:14pm
2
in the best temps 70 to 80 deg f
cure time 2 hrs
sand it tomorrow (day after)
not in writing just what Ive seen and do
humidity changes things
Thanks Ken, I've left it for the day... hopefully tomorrow I can get back into it.
Yes to what Ken said
If you click the link you will get the Stingray step by step......
CE resin can be flipped in about 2 hours....KK resin is much faster.....I like to wait a few days before sanding......
http://www2.swaylocks.com/forums/first-epoxy-glass-job-s
Stingray
Hardener info from the Resin Research website:
**
**
Some examples: 70F (21C) 80F (27C) 90F (32C)
**Pot Life **
**
**
Kwik Kick 18 min. 14 min.
11 min.
RR 2000/2100F
22 min. 17 min.
13 min.
RR 2000/2100S 40 min. 30 min.
22 min.
**Set Time - Tack Free**
****
Kwik Kick
1.5 hrs. 45 min.
30 min.
RR 2000/2100F 3 hrs. 2 hrs. 60 min.
RR 2000/2100S
6 hrs. 4.5 hrs.
3 hrs
~Brian
www.greenlightsurfsupply.com