Resin swirls on foam

Howzit All, My name is Roman and this is my first post. When doing resin tints or swirls on foam do you squeegee all the resin off the foam or do you leave a thin layer? I left a thin layer and got choke pin holes. my first time doing color work directly on foam. Thanks and Aloha


     Howzit romz1, First off the pics areway to small to see anything. If the resin work is on the foam pin holes are no big deal since you can fill them when you laminate the board, One thing is where there is no air there will never be any chance of getting air when glassing since the foam is sealed. Aloha,Kokua

Bigger pics