Resin Trails From My Squeegee

I am using too much pressure? Should I round the corners of my squeegee a bit more? Tips?

show us some pics of your sqweegee and the trails your talking about

 

please

    Howzit dean, I agree with ken since the only thing I can think is you are not angling your squeegee so it is pushing the resin towards the rail and just leave the squeegee ends square. Do you buy your squeesees already cut to length. I used to buy mine in 3 ft lengths and cut them to the length I wanted then cut an inch off the top to make them more flexable plus slicing some line diagonally even makes them more flexable.Aloha,Kokua

deanbo

I thought you were an epoxy builder.

Try using a plastic spreader instead of a squeegee.

Take some pics while you are glassing your next board so we can see what you are doing.

Cheers

Mooneemick

Squeegee / spreader, they both shift resin.

deanbo

that’s true they both shift resin , glad to see you have that covered.

would have thought after all these years as a surfboard manufacturer ?  you would have the fundamentals of glassing worked out !!!

Cheers

Mooneemick

haaaaaaa’’   haaaaaa’’    i cant help it haaaaaaa;‘’ haaaaaaa’’  haaaaaa’’

 

 

**            cheers huie
**