Hi guys please help…
I’m making a fish - the dimensions I’ve settled on are 6’2"x22"x3" tail at 1 ft 16 1/2" nose at 1 ft 17".
I’m going to be using it in small waves in England that are often slack - what rocker should I put in the nose and tail and how far forward of centre should I put the widest point?
Any suggestions will be greatfully recieved…
Cheers
The 6’0" fish I’ve been riding lately has a fairly flat rocker and I’ve had no regrets. I don’t measure rocker, I just go by…kind of flat, moderate or plenty rocker when asked how much rocker there is in a board I’ve shaped. The 6’2" Clark fish blank looked like it had too much rocker so I bought a longer blank ( I forget which one) so there would be less rocker. If you’re gonna be using your fish in what seems like weak surf, I would think you would’nt need all that much rocker. I use mine in smaller Hawaiian reef breaks and have had no problems with my board not feeling like it needed more rocker. I also put the wide point 3" up from center. Hope this helps.