Hey guys, what type/grit of sandpaper should I use to sand off a small bead of resin on the trailing edge of a fin? Wet or dry? Thanks in advance.
Hey guys, what type/grit of sandpaper should I use to sand off a small > bead of resin on the trailing edge of a fin? Wet or dry? Thanks in > advance…********drag a razor blade over it lengthwise on the flat surface of the fin at the trailing edge. put much more pressure in the bead than the on the flat of the fin using the flat area only as a guide. work it until the void in front of the bead is gone. use some 400 then 600grit and polish to finish(this small area is easy to just finish by hand).