Year Built2014
ShaperHuck
ManufacturerHuck
Model NameSea Flight
LocationDesert Drought Cove
9’0" x 22" x 3" longboard glider, single fin, thick down rails, slight V in tail, US blanks “Classic” density, glassed with RR epoxy 6 oz. top and bottom with 4 oz. patches, resin pin lines.
After 5 years as a single fin, I converted it to a quad. I placed my fronts at 16" up to the back of the fin. They are 1&1/8" in from the apex of the rail, with 1/4" toe-in, and 5 degrees cant. The back fins are 8&1/8" up to the back edge. 1&3/4" in from the apex of the rail, with 1/8" toe-in, and 3 degrees cant. The fins shown are 4&1/2" base fronts, single foil (flat inside), with 4" base rears, double foiled. Really enjoying the new feel of this old favorite!
