sealing my board

i have just put in probox boxes and am about to sand everything down incuding the whole board now i want to put some sort of coat overtop to seal it? would this stuff work? either of them? id put it over the whole sanded board its a PU board with polester resin

 

http://www.canadiantire.ca/AST/browse/3/HouseHome/PaintStains/SpecialtyPaints/PRD~0481500P/Krylon%2525AE%252BAcrylic%252BCrystal%252BClear.jsp?locale=en

 

http://www.canadiantire.ca/AST/browse/4/Auto/AutoBodyRepair1/AutoBodyPaintProtectants/PRD~0473506P/Dupli-color%252BAcrylic%252BLacquer%25252C%252BClear.jsp?locale=en

Yes, you can just scotch bright it will the white pad (3M) after spraying. It’s called “Arylic Finish”!

 

what is the white pad? cant i just spray it andleave it??? :S

You can spray it and leave it however it looks better if you give it a light pass with a White Scotch Bright Pad and some water.

 

Fin boxes are in i put the fins in for fun :) going to sand and seal today

 

 

Is it a twinzer or a quad. If it’s a quad (which it appears to be), the larger fins go in front. Maybe you’re just experimenting?

[quote="$1"]

Is it a twinzer or a quad. If it's a quad (which it appears to be), the larger fins go in front. Maybe you're just experimenting?

[/quote]

 

oh yes i know :P i was just seeing how they fit haha.but i might try that out like that il probably switch them all over the place even asymetrically :D

I'm surprised resinhead hasn't told you how to seal. He knows sealing better than anyone. He even has a boat named the SealSlayer 2000.

 

How to seal:

Ingredents. 2 seals, one onion, 2 gallons of olive oil, 2 bottles of anti freeze, 2 porn magazines, shotgun shell, and six pack of beer

1) Take 2 seals, place duct tape over seals mouths

2) Cut one in half and and put other half aside for later

2) Make other seal watching first seal. make sure seals duct tape over other seals mouth is still secure

3) Place blue plastic tarp under large open room of at least 10 x 10

4) cut first seal into small 2x2 chuncks and place in blender.

5) mix oinion, shotgunshell, anti freeze,

6) simmer on stove for 2 hrs until pudding consistency

7) let cool, then mix in olive oil, and one beer.

8) put in blender and mix throughly.

9) set aside,

10) take out porn mags and drink beer, your done.

11) smeer on board to make water tight

12) let other seal go to tell rest of herd WTF just happened.

 

intersting sealing recipe, :D

You asked for it?

 

Seal rib eye with a mushroom glaze....Yummmmmmmm now thats as recipe!

You asked for it?

 

Seal rib eye with a mushroom glaze....Yummmmmmmm now thats a recipe!