Making a pair of modern twinnies.
6mm mdf
Black acrylic paint
8oz cloth
Epoxy
If you dont try youll never know.
Okay I'll bite. I hate you. Any better?
As long as they are well encapsulated and stay that way, I don’t see any problems. A little harder to foil without the lamination “rings” to read but should work fine.
Hey Fletcher-
I like that fin shape, never had it on a twin. How tall are they?
I have never had a twin-fin board either but that is a different story. When the time comes I already have 2 sets of Halcyon-template keels at 15mm (5/8" thick ) with halo’s ready to go.
I am wondering about the glassing, it seems cloudy, dry, and a little porous from the pictures. Are you using general purpose materials or surfboard stuff?
I just did one with 4x7.5oz Ebay ‘mystery’ cloth and Old#7 epoxy and I can still see the grain in the wood underneath 4 layers and the color black in the screen-printed logo ‘pops’ under one layer of glass and resin. I wetted out 3 layers off to the side, coated the wood, lammed the three layers, added the logos, and lammed the top layer all in one batch. The darker wood in the picture is end grain pine with another 4 layers of glass and resin besides the 4 on top.
