if anyone would be generous enough to maybe give me some dimensions of funboards and shortboards that have came out good and people liked them. im going to shape some boards, first try, and i want to make a fun shape and a shotboard around 6’8". also any suggestions on what blanks to use from clark foam???
the most fun board i have is an E.T here’s the dimensions: length: 7’10; nose:16 1/2; width: 22 3/4; tail: 14 3/4; thick: 3 1/8; nose rocker: 3 1/4; tail rocker: 3 1/2; fin: 9.5 inch single fin; description: beak nose, round tail, downturned (relatively hard) rails throughout, thicker under chest area and middle of board. very very slight concave from nose to about a 1/3 back (going to flat) and then to a rolled vee in tail. by looks and weight i’d say glassed in 6oz silane have fun -steve
if anyone would be generous enough to maybe give me some dimensions of > funboards and shortboards that have came out good and people liked them. > im going to shape some boards, first try, and i want to make a fun shape > and a shotboard around 6’8". also any suggestions on what blanks to > use from clark foam??? for a shortboard, try 6’8" x 11 1/2"nose X 19.5"center x 14" tail, something along those lines. maybe from a 7’0R blank or 6’11"R…the 7’0"R is gunnier and has more rocker. boards under 7’6" or so i use superlight foam…
for a shortboard, try 6’8" x 11 1/2"nose X 19.5"center x > 14" tail, something along those lines. maybe from a 7’0R blank or > 6’11"R…the 7’0"R is gunnier and has more rocker. boards under > 7’6" or so i use superlight foam…Yeppers, I have used both the 7’0" R and the 6’11"R for 6’8"s and have been way happy with them, especially the 6’11"R