Hey Guys
Im building a board using PU and epoxy.
I painted 2 stripes down the deck on the foam using water based acrylic from the hardware store (bunning for you aussies).
When I poured a bit of resin for my logo, it seemed to have stained the paint a little bit.
After I finished the lam the stain was still only where it was for the logo.
I was thinking that I may have to seal it with some clear or something.
turned out OK on the test patch I did.
It was mentioned to me to maybe do a cheater coat of resin over the paint work before I lammed to seal the paint.
I used to do that with poly resin.
Any thoughts??
Cheers