Here is an updated Forum on My Steve Lis Restoration Project from Four Years ago.
If you have any questions about procedures, how-to’s, chemicals used, etc.
Please Feel Free to ask via the Forum.
Where is your shop at?
Located in San Diego,
Please Visit my website for hours and directions
Nick, is that 4 oz you put on the deck? The reason I ask is I have a similar beat up board and I flip flop over just sanding the numerous dings and leaving it or covering it with another layer of pigmented glass. Wondering about using a lighter glass for that purpose like 2 oz. Mike
Looks like more work than building one from scratch.
But I give props for the effort.
Hope you are getting big $.
Hi mike. No that is not 4 oz it is 2oz Volan.
Hi Harry, you are defintly right about that being more work than it’s worth, but it was a personal board so there was a lot of extra effort.
Hi joul, thanks for putting the photos up
A labor of love.
Any idea how much weight was added to the board?
Well when I first got the board it weighed around 30 pounds, it had several layers of hotcoat resin. Then by the time I got done sanding it down and prepping it, it only weighed around 10 pounds, and by the time I was done with it, it weighed around 20 pounds
Please tell me you’re being facetious about the weight.