T minus 1 week and counting......................................

Bringing this: http://www.swaylocks.com/forums/big-sur-2015 over to the general discussion forum in case folks didn’t know.

The coolest weekend of the year is about to go down.

Dozens of like minded, board building, surf folk and tons of surfboards will be converging for a weekend of fun, waves (knock on wood), food, surfboard talk, and fun fun fun.

Did I mention FUN?

Be there or be square!

Seriously, if you have not been before, do yourself a favor and just come on through. You will be glad you did.

Looks fun

I’d forgotten about it.  A shame cause I booked a California trip for the last week of October and into November.

I’m guessing no campfires this year. Señora Pato had the good idea to bring a bunch of candles.

I’m starting to look forward to the event…

Looks like campfire restrictions are not in effect at this campground according to Los Padres Forest Service website.  I have an inquiry to Campone.com to be sure.

Did you see the propane firepit the hang gliders had last year? I got one. There WILL BE FIRE!

Should I bring my Longboard or my Boogie board?

Just got this in my email from Gina @ Campone.com re: campfire at Plaskett inquiry…

**"Yes all good."**

Surfed about 45 minutes south of Plaskett today. My buddy trunked it and I should have done the same. Was steaming in my new 4/3.

Highway 1 south of the campground will be closed during the nights from 10PM until 7AM.

Make SURE you are in before 10PM!

    [IN THE CENTRAL CALIFORNIA AREA] 

    IS CLOSED FROM 1 MI NORTH OF THE RAGGED POINT INN (SAN LUIS OBISPO CO) TO  

THE SAN LUIS OBISPO/MONTEREY CO LINE FROM 2200 HRS EACH NIGHT TO 0700 HRS 

EACH MORNING SUNDAY THRU FRIDAY THRU 6/1/16 - DUE TO CONSTRUCTION - MOTORISTS  

ARE ADVISED TO USE AN ALTERNATE ROUTE 

Planning on heading up for a few hours Saturday morning with  a 40"x40"x1/2" fin panel for whomever, and maybe a couple of other things if I can dig them out. Can’t stay long. Cal Poly  game Saturday night.

Getting pumped to go!! I can finally make it back to Plaskett after a few years hiatius, sponging a riding up with Keith M. Patrick, and Zippy the Weiner.   Got this wobbly pinlined …super speed egg,  7’7" beast done 30 mins ago…looking forward to the first surf on it, out of the bag…into the water speed egg.

 

 

STOKED you’re coming Resinhead!

It’s been too long!

 

 

I’m trying to finish a board in time for Swayholics, but I’m cutting it really close.  Yesterday I installed the plugs, 8 of them (for a twinzer), and while I was setting the second of four jigs the resin in the cup starting smoking.  I barely had time to set the jigs and the resin in the holes kept bubbling.  I thought the board was going to go up in smoke or at the very least melt the foam.  I set up fans and the board came through OK.  On the deck you can see shadows, I’m hoping it was just the resin seeping into the foam and not melting the foam.  Never use fast hardener to set plugs when it’s 80 degrees out. Fun times!

I have today and tomorrow to sand the board, so I think I will get to ride it a Sand Dollar.  I doubt the conditions will warrant the fun gun but it will fun to try.  

 

Oh, It will be good to see you Tom, after much time…

 

Hey Llilibel, too late now but, if that ever happens again, you can throw a ziplock bag of ice on it.