Okay I do a great job of taping the inside of a circle but how do you get a nice round tape job on the outside of a circle? the inside finished edge wants to bunch up. When you tape inside of a circle the tape folds on itself which is cool but that darn outside circle. Whats the deal? Special stretchie tape?
your tape is too wide. find the 1/4" stuff and go nuts.
your tape is too wide. find the 1/4" stuff and go nuts. 1/4 regular masking tape?
You can get a special tape for doing radius edges etc, which is just like regular tape, but has a crinkle finish which is slightly stretchy and goes around anything. It has a low tack on it, so you have to be careful if your spray painting, as you’ll blow the stuff right off the board!!
if im doing a circle i tape off the wole area with 50mm then draw the circle on top of the tape and cut out with a razor blade !
if im doing a circle i tape off the wole area with 50mm then draw the > circle on top of the tape and cut out with a razor blade ! Hey Paul, you up and running yet??? And have you been in today? because Devon looks to be MAHOOOOOSIVE!!!
that’s right. 1/4" regular masking tape.
no havent bit of a smame as the whole west coast is going off!!! but move in tommorow so there are plenty of swells you going down puts this weekend? just trying to find a resin supplier in ireland now this is causing a few probs! new workshop will be up and running in around three weeks want it to be spot on!!
no havent bit of a smame as the whole west coast is going off!!! And wind in the north sea is ruining it all over here. AAAARRRGGGHHHH!