This is just a test post to try to figure out how to post pictures.
Hey I got it. Just ask someone under 20 to help and its easy. The hard part is getting them to slow down enough so I can actually learn!!!
just another test. new here.
test in process
Pretty grain, damned nice. What’s with the white rails? If it’s a cover up, it works well to focus attention to the grain of the wood. Is that finish epoxy or poly?
JSS
Hey Maxmercy
The rails are made out of divinacell foam, I wanted to keep the weight down. The foam is kinda puke green so I used white epoxy paint and clear coated it to get that gloss. The frame inside that board is all foam to. weight is around 8Lbs.
Mike
Automotive clear coat? Isn’t that stuff nasty to spray, need lots of safety equipment?
Hey Maxmercy
Its definetly nasty ,Not to be taken Lightly at all, I work on boats for a living… When I spray I am fully in moon gear, tyvec suit,latex gloves,and most importent a air supply resperator. I wear the air supply befor I even open a can of paint to look at the color. I cant say I have always been so carefull, but the last few years I’ve been getting alot better at taking care of myself.
I mostly use Awlgrip brand paint and clear. Unbelivable gloss and tough as nails when fully cured. I also use a turbine spray system HVLP that really cut down on overspray.
Mike
photo test
another test
hmm f#ken compsanders