I built your 6’6" fish and your 7’ wide tailed thruster… I rode the 6’6" and it is fun as it can get…the 7’, 3" forward of center is perfect for a heavy guy like me…paddles great and surfs great…stoked. Have you ever worked up the numbers for a 6’2"x17"x22.5"x18"x2.75" fish? Thanks again…I’ll keep buggin you since all three matrix I’ve used work very well.
I built your 6’6" fish and your 7’ wide tailed thruster… I rode the > 6’6" and it is fun as it can get…the 7’, 3" forward of center > is perfect for a heavy guy like me…paddles great and surfs > great…stoked.>>> Have you ever worked up the numbers for a > 6’2"x17"x22.5"x18"x2.75" fish? Thanks > again…I’ll keep buggin you since all three matrix I’ve used work very > well. AKA, Great to hear. I love it when a plan comes together! Here’s the 6-2 fish. It has your numbers with the wide point offset 1" forward. The 1" offset just formed a good curve with your widths. The stern is 7.4" wide, and the swallow is 5" deep. You’ll have to provide the inside swallow curves for yourself… maybe flip the nose template. The tail rocker is 2.8% of board length at 2.1". It has minimal progression. The numbers would be heights to the stringer before you cut your swallow. Of course, your tail V will increase this rocker with the stern stringer missing. Also, cutting the swallow will move the progression curve into the fin area… right for a fish. Nose rocker tends to 28% from center tangent at 3.1". The foam is 2.7" thick with full rails. Rail line is .9" above bottom foam with only .7" tuck. Good luck. Tell me if you need anything tweaked. Length , Outline , Rocker 0 , 0.00 , 2.10 0 , 3.70 , 2.10 0.5 , 4.07 , 2.02 1 , 4.40 , 1.95 2 , 4.99 , 1.81 3 , 5.50 , 1.68 4 , 5.96 , 1.56 5 , 6.37 , 1.45 6 , 6.75 , 1.34 7 , 7.09 , 1.24 8 , 7.42 , 1.15 9 , 7.72 , 1.06 10 , 7.99 , 0.98 11 , 8.26 , 0.90 12 , 8.50 , 0.83 13 , 8.73 , 0.76 14 , 8.95 , 0.69 15 , 9.15 , 0.63 16 , 9.34 , 0.57 17 , 9.52 , 0.52 18 , 9.69 , 0.47 19 , 9.84 , 0.42 20 , 9.99 , 0.37 21 , 10.13 , 0.33 22 , 10.26 , 0.29 23 , 10.38 , 0.25 24 , 10.49 , 0.22 25 , 10.60 , 0.19 26 , 10.69 , 0.16 27 , 10.78 , 0.13 28 , 10.86 , 0.11 29 , 10.93 , 0.08 30 , 11.00 , 0.06 31 , 11.06 , 0.05 32 , 11.11 , 0.03 33 , 11.15 , 0.02 34 , 11.18 , 0.01 35 , 11.21 , 0.01 36 , 11.23 , 0.00 37 , 11.25 , 0.00 38 , 11.25 , 0.00 39 , 11.25 , 0.00 40 , 11.25 , 0.01 41 , 11.24 , 0.02 42 , 11.24 , 0.03 43 , 11.23 , 0.04 44 , 11.21 , 0.06 45 , 11.19 , 0.07 46 , 11.16 , 0.10 47 , 11.12 , 0.12 48 , 11.08 , 0.15 49 , 11.02 , 0.18 50 , 10.96 , 0.21 51 , 10.88 , 0.25 52 , 10.79 , 0.28 53 , 10.69 , 0.33 54 , 10.58 , 0.37 55 , 10.45 , 0.42 56 , 10.30 , 0.48 57 , 10.14 , 0.53 58 , 9.96 , 0.60 59 , 9.75 , 0.66 60 , 9.53 , 0.74 61 , 9.28 , 0.81 62 , 9.00 , 0.90 63 , 8.69 , 0.99 64 , 8.35 , 1.08 65 , 7.97 , 1.19 66 , 7.55 , 1.30 67 , 7.08 , 1.43 68 , 6.55 , 1.57 69 , 5.94 , 1.72 70 , 5.25 , 1.89 71 , 4.43 , 2.09 72 , 3.44 , 2.33 73 , 2.14 , 2.63 73.5 , 1.26 , 2.83 74 , 0.00 , 3.10 Rails: Width , Deck , Bottom 0 , 1.80 , -0.90 1 , 1.80 , -0.90 2 , 1.80 , -0.90 3 , 1.80 , -0.90 4 , 1.80 , -0.90 5 , 1.79 , -0.90 6 , 1.77 , -0.90 7 , 1.74 , -0.90 7.5 , 1.70 , -0.90 8.0 , 1.66 , -0.90 8.5 , 1.60 , -0.90 9.5 , 1.41 , -0.90 10.0 , 1.25 , -0.90 10.2 , 1.17 , -0.90 10.3 , 1.12 , -0.90 10.4 , 1.07 , -0.90 10.5 , 1.02 , -0.90 10.6 , 0.96 , -0.88 10.7 , 0.89 , -0.83 10.8 , 0.81 , -0.76 10.9 , 0.72 , -0.68 11.0 , 0.62 , -0.58 11.10 , 0.48 , -0.45 11.20 , 0.28 , -0.26 11.25 , 0.00 , -0.00
That first length number should of course be 5: Length , Outline , Rocker 5 , 0.00 , 2.10
Thanks again, Noodle…>>> That first length number should of course be 5:>>> Length , Outline , Rocker>>> 5 , 0.00 , 2.10